Відео

👍

From what I understand this method works on Honda Civics up to 2011. 2012 Honda Civic and beyond models require programing. If you looking to DIY or to program several keys, you can try this: amzn.to/4dFqEb0 But if you just need a spare key fob, I would suggest checking out your local Locksmith, they should charge around $150 give or take. If you dont have a key at all, then the price is going to be much higher. Good luck bro. Hope that helps!

Sometimes, it is because the internal parts are rusty or not lubricated. Try manually closing and opening the lock a lot of times to see if it losens up.

Great. But before you do. Check out what happened to me. There is another video I made, where I had a leak that looked exactly like a tipical valve cover gasket leak and it ended up being a gasket from the pvc valve. So check that first, before replacing the actual valve cover gasket, just to meke sure. I replaced my valve cover with the gasket and I didn't have to 😭 ua-cam.com/video/eAeoNpENBdI/v-deo.htmlsi=XUpE4DlxS5V01COu

Great. But before you do. Check out what happened to me. There is another video I made, where I had a leak that looked exactly like a tipical valve cover gasket leak and it ended up being a gasket from the pvc valve. So check that first, before replacing the actual valve cover gasket, just to meke sure. I replaced my valve cover with the gasket and I didn't have to 😭 ua-cam.com/video/eAeoNpENBdI/v-deo.htmlsi=XUpE4DlxS5V01COu

Let me know how it goes for you. Good luck bro

@@CrazyCarMods! That’s actually the original video that lead me to this one, thanks! I’m going to do both the VC and the crankcase hose in one shot to cover all of the bases

@@CrazyCarMods Nothing a few hours and a couple Modelos can’t fix 🤣

You're welcome 👍

Which method did you use?

But, funny enough, I am also an older woman, like a lot of others that commented here.

👍

You're welcome 😊

Thanks for the visit

Try it out. You gonna love it. Specially if you have Dual Cone Intakes.

Thanks 💯

Should take you anywhere from 3 to 5 hours, give or take depending on your tools and skills. For instance, if you have a lift, it will be much faster. Or if your bolts have rust, that would probably add time since you gotta fight with those bolts. As far as removing the O2's, I find that more contrible to work with since space is very limited. Unplugging the O2's from the top is a must in order not to wrinkle the O2's cable. But it never hurt to give it a try. Let me know if you can get away from removing the from O2's.

⁠@@CrazyCarModsis that 3-5 hours to remove and re-install or just remove ??.I have all the tools needed but will be using jacks etc. Once the down pipes are removed can you get to and easier see the engine supply coolant pump pipe. Does the black ramps that you have give you enough height to get under and do the work

@michaelclare1978 to be honest bro, between the heat, the tight space, and trying to get so footage and those crazy angles I didn't notice. Ramps will definitely give you a nice space to work. (Put some jack stands for safety, though)

@@CrazyCarMods… so about 5 hours to remove and replace down pipes?.I will be attempting this at the weekend. Got a coolant leak somewhere and need to remove the 2 down pipes to check that pipe. Thermostat and water pump all good as is the pipes going to and from them both.

Yeah, 3 to 5 hours from start to finish, if its your first time. Once you have done it once and know all the steps in your mind, you can probably do it in under 3 hours.

Glad the video helped you out 👍

Most welcome 😊

Nice 👍 Please post your year, make and model for reference.

Glad it was helpful! 💯

Please post your year, make, and model for reference 🙏

This is a 3 series. Bmw 335i

Thanks bro 💯

@@CrazyCarMods Doing mine today, the way you knocked out those V-bands was fabulous. I used to be a tech for Nissan so have a lot of experience under my belt, but it always helps watching someone else do it first. Are the V Bands really as hard as people say? It doesn't look too bad but almost every forum post makes it seem like they're impossible to get on. I have small hands, maybe that will help. Lol Again, thank you for taking the time to upload this, really helpful.

The key to getting those v bands on is to have the v bands almost on (meaning like half on). Also, try not to touch the v band when putting the down pipe because that can make the v band fall off. It makes it challenging because of the tight space. Good luck, bro. You're gonna love it once it's done 😈

When using vinegar, make sure to cover your paint. Vinegar is not going to damage your paint if it touches it, but if you leave residue on the paint, plus with the sun rays (heat), then that might be an issue. So make sure to rinse your paint from any products you use. Also, if applying the clear coat, you do want to cover your paint. You can use plastic bags, or you can buy some thin plastic sheets in walmart or Home Depot (should only be a few dollars) $3 to $5. When spraying, try it on a piece of cardboard or something. You can spray many light coats. Dont worry about covering all the surface, let it dry, and apply thin coats. It will all be covered eventually. This way, you will avoid over spraying the headlight. Good Luck 👍

Good luck!! 💪

Im by fort Lauderdale bro

I will work as long as the insulation is not damaged. Just dont spray the fabric itself. Be careful with the over spray. Good luck bro.

@@CrazyCarMods I bought a new fabric on Amazon. I must say that it was the best choice not to mess with the old one. Another advice I would give is to always paint it by hand and not use spray glue. Unfortunately my glue can finished as I bought only one, so in some parts I had to use the spray glue I had and in some points it appeared on the surface of the fabric😬 That's it.

No. The clear coat will not work with the WD40. The WD40 is only a quick, fast, easy method, but it will not last long. Clear coat would only be good after any cleaning the headlight lens. The clear coat is to protect and to make the lens last longer without oxidation.

Lol he disappeared then showed up with Honda video

@@judedecamp2522 😕

You proof what I thought about the video before uploading it lol. Im actually starting to introduce different content, I believe, is interesting. The other cars you guys will see are from close family members. If I have a chance to fix or correct any issues, i just thought to upload the footage that eventually some will appreciate. Even though Im bringing other footage to the channel, the original content is still my hobby. Thank you for the support 👏 And guys, please bare with me, I started this channel as my hobby. it's just that I haven't had much time for hobbying 😭

Gracias Hermano 👍